I have personally begun changing the strut and spring. I found the top bolt for the suspension arms had stuck over time. My mechanic suggested heating it up and flash cooling it which has worked but you will need new arms as the rubber either burns or the grease inside boils and bursts it open.
@@autodocuk Thank you so much for commenting. I want to know how to replace the engine mount. I know I need to exchange four mounts, but I don't know how. FYI, I can use the lift to work on the floor. Best regards,
1) torque settings settings, the Audi manual says 45nm for the 2 upper arms bolts 2) Audi manual says you shouldn’t use a chisel to enlarge to gap to get the ball join out 3) pinch bolt should be tighten at about ride height level (90deg +/- 5 deg). Once again from the Audi manual
Torque settings are wrong. Snapped two bolts trying your numbers - overall video was still very helpful even if i did have to extract a bolt from the rear and replace a pinch bolt. It's always hard to say if the bolt may have been previously over-tightened and now it snapped.
![How to change front wheel bearing / front hub bearing on AUDI A6 2 (C6) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/QYVDz3JRaB0/mqdefault.jpg)
![How to change front wheel bearing / front hub bearing on AUDI A6 2 (C6) [TUTORIAL AUTODOC]](/img/tr.png)
![How to change a front shock strut on AUDI A6 C5 Avant [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/CSwe1hzSBh4/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I have personally begun changing the strut and spring. I found the top bolt for the suspension arms had stuck over time. My mechanic suggested heating it up and flash cooling it which has worked but you will need new arms as the rubber either burns or the grease inside boils and bursts it open.
The entire assembly is aluminium and corrodes over time. These pinch bolts are a nightmare. I speak from experience
Hi. Can you tell me how to change the engine mount?
Please clarify or rephrase your question.
Best Regards,
Autodoc Team!
@@autodocuk Thank you so much for commenting. I want to know how to replace the engine mount. I know I need to exchange four mounts, but I don't know how.
FYI, I can use the lift to work on the floor.
Best regards,
1) torque settings settings, the Audi manual says 45nm for the 2 upper arms bolts
2) Audi manual says you shouldn’t use a chisel to enlarge to gap to get the ball join out
3) pinch bolt should be tighten at about ride height level (90deg +/- 5 deg). Once again from the Audi manual
Thank you for your comment. We are constantly working on improving our videos.
Torque settings are wrong. Snapped two bolts trying your numbers - overall video was still very helpful even if i did have to extract a bolt from the rear and replace a pinch bolt. It's always hard to say if the bolt may have been previously over-tightened and now it snapped.
Thanks for your comment, we will definitely take this into account in our new videos.
AUTODOC
Tutorial pentru Renault Megane 1 Classic se poate?
how many NM for bottom shock 18mm bolt and 3 13mm bolts on top please?
1 to 92 nm
3 to 65NM
nice video frfr
Lol in real life the pinch bolt gets stuck and you give up
Facts
My pinch bolt snapped putting it back together using their torque settings
@@mountains889 pretty sure they are 1 time use only bolts since they are aluminum.
none of the links are working. May be update.
Thank you for contacting us.
Please could you describe which links are not working and we will be able to check?
AUTODOC
Thank you for contacting us.
Please could you describe which links are not working and we will be able to check?
AUTODOC
Hi, all the links in the description. It used to show an error Page. Now it shows "OOPS updating website"
The footage you have on the pinch bolts is some bullshit, just saying.
Good 👍👍👍
AUDI Q5 . CHANGE SHOCK ABSORBER